Hunan tungsten mud use, tungsten alloy weight bar

Jingzuan new tungsten alloy material Hebei tungsten mud use, plate rolling tungsten plate rolling can be divided into hot rolling, warm rolling and cold rolling.Because of the large deformation resistance of tungsten, ordinary rolls cannot completely meet the requirements of tungsten sheet rolling. Rolls made of special raw materials should be used..During rolling, the rolls should be preheated. According to different rolling conditions, the preheating temperature 100-350.It can be processed only when the relative density of the blank (the ratio of the practical density to the theoretical density) is greater than 90%, and the processing function is excellent when the blank density is 92-94%.

The diameter of the filament can be measured by the gravimetric method or the vacuum standard current method.In the process of drawing, as the diameter decreases, the deformation resistance increases (such as diameter 0.1.The breaking strength of 3 mm tungsten wire can be as high as 350 kgf/mm, and its plasticity is correspondingly reduced.In order to improve the reprocessing performance, it is generally necessary to perform stress relief intermediate annealing.In addition, electrolytic corrosion can be used to process the wire to a diameter less than 0.01mm filament.

Jingzuan new tungsten alloy material tungsten alloy weight rod, tungsten alloy fishing sinker for sea fishing is made of tungsten alloy, which has the characteristics of large density, small size, high hardness, corrosion resistance, wear resistance and long service life, and it is non-toxic and pollution-free. It is the choice of fish sinkers for sea fishing.Sea fishing is completely different from river fishing. Sea fishing is more difficult. You must have a set of self-contained sea fishing equipment, so not all fishing sinkers can be used for sea fishing..It has good corrosion resistance, is non-toxic and environmentally friendly, will not cause harm to humans and fish, and will not pollute the environment..The tungsten alloy fishing sinker for sea fishing has excellent performance, can dive deeper, and can have more opportunities to catch big fish, so that the angler can get more fishing pleasure.

Golf is more and more favored by high consumers. In order to meet the needs of various groups of people without increasing the cost too much, tungsten screws began to develop under this background..The key part of the golf club is on the head. The weight, hardness, elasticity and flatness of the head will affect the movement of the ball..According to the survey of people's usage, everyone has different physiological needs for club weight.In order for everyone to maintain a good sense of comfort during use.Use the increase or decrease of tungsten screws to change the weight of the ball head to meet this demand.

In order to save energy and purify the environment, using scheelite or molybdenum oxide to replace tungsten, tungsten carbide rods,liron, molybdenum and iron as additives for direct steelmaking has achieved significant economic benefits since the early 1980s..In addition to low-alloy steel, it can also be used on high-alloy steels such as high-speed tool steel, die steel, wear-resistant steel, etc..

タグ：tungsten carbide rods